3 月 . 21, 2024 09:27 返回目录

Fiberglass Mesh Protects Plaster Layer Surface From Cracking

Plastering mesh glass cloth is used for reinforcement surfaces during plastering, installation leveling floors, waterproofing, restoration of cracked plaster in order to prevent cracking or fraying of the plaster.

玻璃纤维网格布

Fiberglass mesh is cheap material that does not burn and is characterized by both low weight and high strength. These properties allow it to be successfully used in the formation of plaster facades, as well as use on internal wall and ceiling surfaces. This material is widely used for fastening the surface layer at the corners of the room.

Most widely used standard fiberglass plater mesh is the density of 145g/m² and 165g/m² for exterior cladding and facade work. Resistant to alkalis, does not decompose and will not rust over time, it does not emit toxic and harmful substances, has a high resistance to tearing and stretching, protects the surface from cracking and improves its mechanical strength. Easy to handle and use.

Our Fiberglass Plaster Mesh Sizes:

Plastering mesh facade fiberglass cloth 90, 140, 145 , 160, 165, 180, 185g/m².
Mesh shape: square.
Mesh size 5 × 5mm, 4 × 4mm, 2 × 2mm.
Color: White, yellow, blue, green, red, orange.
Roll size: 1 × 50m.

Application of Plaster Fiberglass Mesh

Fiberglass mesh is used to strengthen the surface of the plaster layer all kinds of buildings.
This mesh reinforced liquid waterproofing layers slabs and roofs.
Fiberglass mesh used to impart mechanical strength filler floor coverings that are different self-leveling properties.
Application of glass fiber mesh contributes to strengthening plaster, and the bases used for laying ceramic tiles.

Drywall Fiberglass Tape

Drywall fiberglass not-sticking tape and fiberglass self-adhesive tape are used for combining the joints between walls and windows, door together with our fiberglass mesh to repair the cracks, joints and seams of drywall, plasterboard and other surfaces. Drywall fiberglass not-sticking tape should be used with cellophane tape. Fiberglass self-adhesive tape could be used alone.

Specification:

Length (m): 20, 30,40, 45, 50, 90, 100.
Width (mm): 35, 45, 40, 45, 50, 75, 100, 200.

Table 1: specification of drywall fiberglass tape
Class	Design	Density/25 mm		Weight (g/m²)	Tensile strength ≥ N/5 cm × 20 cm		Weaving type	Resin content (for self-adhesive) ％
Class	Design	longitude	latitude	Weight (g/m²)	Wrap	Weft
Standard	FM-DFT-01	8	6	55	550	450	Leno	28±2
	FM-DFT-02	9	9	60	550	500	Leno	28±2
	FM-DFT-03	9	9	65	550	550	Leno	28±2
	FM-DFT-04	9	9	70	550	600	Leno	28±2
	FM-DFT-05	9	9	75	550	650	Leno	28±2
High strength	FM-DFT-06	20	10	75	700	700	Plain	28±2
High strength	FM-DFT-07	5	5	100	1000	1000	Leno	28±2